lkml.org 
[lkml]   [2024]   [Apr]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH net-next v4 13/12] net: lan865x: optional hardware reset
> In the spec, external RESET pin is mentioned as "if implemented", in my 
> understanding it is MAC-PHY vendors choice of implementing it where
> Microchip is implemented it. Using this reset, can be a application
> requirement/decision. It can be controlled from an external application
> where it is not needed SPI to operate.

Since it is optional, controlling the reset pin is clearly not
something for the TC6 core.

However, i doubt having an external application controlling the reset
is a good idea. You don't want to reset during operation. So to me,
this reset should be controlled by the driver. I tend to agree, that
actually performing a reset is optional, but i would expect the driver
to ensure the device is taken out of reset during probe, if the power
on default of the board is to hold it in reset.

Andrew

\
 
 \ /
  Last update: 2024-05-27 18:09    [W:0.104 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site