lkml.org 
[lkml]   [2024]   [Apr]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH v2 1/2] arm64: dts: exynos: gs101: add USB & USB-phy nodes
Add the USB 3.1 Dual Role Device (DRD) controller and USB-PHY nodes for
Google Tensor GS101.

The USB 3.1 DRD controller has the following features:
* compliant with both USB device 3.1 and USB device 2.0 standards
* compliant with USB host 3.1 and USB host 2.0 standards
* supports USB device 3.1 and USB device 2.0 interfaces
* supports USB host 3.1 and USB host 2.0 interfaces
* full-speed (12 Mbps) and high-speed (480 Mbps) modes with USB device
2.0 interface
* super-speed (5 Gbps) mode with USB device 3.1 Gen1 interface
* super-speed plus (10 Gbps) mode with USB device 3.1 Gen2 interface
* single USB port which can be used for USB 3.1 or USB 2.0
* on-chip USB PHY transceiver
* DWC3 compatible
* supports up to 16 bi-directional endpoints
* compliant with xHCI 1.1 specification

Signed-off-by: André Draszik <andre.draszik@linaro.org>

---
v2: fix commit message
---
arch/arm64/boot/dts/exynos/google/gs101.dtsi | 41 ++++++++++++++++++++++++++++
1 file changed, 41 insertions(+)

diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
index 9755a0bb70a1..217699477b32 100644
--- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi
+++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
@@ -1261,6 +1261,47 @@ cmu_hsi0: clock-controller@11000000 {
"usbdpdbg";
};

+ usbdrd31_phy: phy@11100000 {
+ compatible = "google,gs101-usb31drd-phy";
+ reg = <0x11100000 0x0100>,
+ <0x110f0000 0x0800>,
+ <0x110e0000 0x2800>;
+ reg-names = "phy", "pcs", "pma";
+ clocks = <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_ACLK_PHYCTRL>,
+ <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_I_USB20_PHY_REFCLK_26>,
+ <&cmu_hsi0 CLK_GOUT_HSI0_UASC_HSI0_CTRL_ACLK>,
+ <&cmu_hsi0 CLK_GOUT_HSI0_UASC_HSI0_CTRL_PCLK>,
+ <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_I_USBDPPHY_SCL_APB_PCLK>;
+ clock-names = "phy", "ref", "ctrl_aclk", "ctrl_pclk", "scl_pclk";
+ samsung,pmu-syscon = <&pmu_system_controller>;
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+
+ usbdrd31: usb@11110000 {
+ compatible = "google,gs101-dwusb3";
+ clocks = <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_BUS_CLK_EARLY>,
+ <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_I_USB31DRD_SUSPEND_CLK_26>,
+ <&cmu_hsi0 CLK_GOUT_HSI0_UASC_HSI0_LINK_ACLK>,
+ <&cmu_hsi0 CLK_GOUT_HSI0_UASC_HSI0_LINK_PCLK>;
+ clock-names = "bus_early", "susp_clk", "link_aclk", "link_pclk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x11110000 0x10000>;
+ status = "disabled";
+
+ usbdrd31_dwc3: usb@0 {
+ compatible = "snps,dwc3";
+ clocks = <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_I_USB31DRD_REF_CLK_40>;
+ clock-names = "ref";
+ reg = <0x0 0x10000>;
+ interrupts = <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH 0>;
+ phys = <&usbdrd31_phy 0>, <&usbdrd31_phy 1>;
+ phy-names = "usb2-phy", "usb3-phy";
+ status = "disabled";
+ };
+ };
+
pinctrl_hsi1: pinctrl@11840000 {
compatible = "google,gs101-pinctrl";
reg = <0x11840000 0x00001000>;
--
2.44.0.769.g3c40516874-goog


\
 
 \ /
  Last update: 2024-04-29 12:36    [W:0.044 / U:0.408 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site