lkml.org 
[lkml]   [2024]   [Apr]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 5/8] riscv: dts: starfive: visionfive 2: add tf cd-gpios
Date
Per VisionFive 2 1.2B, and 1.3A boards' SCH, GPIO 41 is used as
card detect. So add "cd-gpios" property for this.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
---
arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
index 910c07bd4af9..b6030d63459d 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -303,7 +303,7 @@ &mmc1 {
bus-width = <4>;
no-sdio;
no-mmc;
- broken-cd;
+ cd-gpios = <&sysgpio 41 GPIO_ACTIVE_LOW>;
cap-sd-highspeed;
post-power-on-delay-ms = <200>;
pinctrl-names = "default";
--
2.43.0

\
 
 \ /
  Last update: 2024-04-29 02:28    [W:0.670 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site