lkml.org 
[lkml]   [2024]   [Apr]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v5 0/3] arm64: dts: qcom: apq8016: Add Schneider HMIBSC board DTS
On Fri, 19 Apr 2024 at 20:57, Sumit Garg <sumit.garg@linaro.org> wrote:
>
> On Tue, 9 Apr 2024 at 23:24, Sumit Garg <sumit.garg@linaro.org> wrote:
> >
> > Hi Bjorn, Konrad,
> >
> > On Wed, 3 Apr 2024 at 10:04, Sumit Garg <sumit.garg@linaro.org> wrote:
> > >
> > > Add Schneider Electric HMIBSC board DTS. The HMIBSC board is an IIoT Edge
> > > Box Core board based on the Qualcomm APQ8016E SoC. For more information
> > > refer to the product page [1].
> > >
> > > One of the major difference from db410c is serial port where HMIBSC board
> > > uses UART1 as the debug console with a default RS232 mode (UART1 mode mux
> > > configured via gpio99 and gpio100).
> > >
> > > Support for Schneider Electric HMIBSC. Features:
> > > - Qualcomm Snapdragon 410C SoC - APQ8016 (4xCortex A53, Adreno 306)
> > > - 1GiB RAM
> > > - 8GiB eMMC, SD slot
> > > - WiFi and Bluetooth
> > > - 2x Host, 1x Device USB port
> > > - HDMI
> > > - Discrete TPM2 chip over SPI
> > > - USB ethernet adaptors (soldered)
> > >
> > > This series is a v2 since v1 of this DTS file has been reviewed on the
> > > U-Boot mailing list [2].
> > >
> > > Changes in v5:
> > > - Addressed another nitpick from Stephen.
> > > - Collected Stephen's review tag.
> > > - Warnings reported by Rob's DT check bot aren't related to HMIBSC
> > > board DTS but rather they are due to msm8916.dtsi or extcon-usb-gpio.txt
> > > still not converted to YAML format.
> > >
> >
> > I haven't seen any further comments on this series, can you help to pick it up?
>
> Gentle reminder.
>

Is there anything missing on my part to get this accepted? It has
already gone through the review cycle with v5 posted for about a month
now.

-Sumit

>
> >
> > > Changes in v4:
> > > - Dropped IRQ_TYPE_EDGE_FALLING for pm8916_resin given the expectations
> > > of Linux kernel driver. Instead depend on systemd workaround suggested
> > > by Caleb to get expected HMIBSC reset behaviour.
> > > - Incorporated further DT coding style comments from Stephen.
> > > - Warnings reported by Rob's DT check bot aren't related to HMIBSC
> > > board DTS but rather they are due to msm8916.dtsi or extcon-usb-gpio.txt
> > > still not converted to YAML format.
> > >
> > > Changes in v3:
> > > - Picked up tags.
> > > - Fixed further DT schema warnings.
> > > - Configure resin/power button interrupt as falling edge.
> > > - Incorporate DTS coding style comments from Krzysztof and Konrad.
> > >
> > > Changes in v2:
> > > - Fix DT schema warnings.
> > > - Incorporate suggestions from Stephan.
> > > - Document UART1 mode GPIOs based mux.
> > >
> > > [1] https://www.se.com/us/en/product/HMIBSCEA53D1L0T/iiot-edge-box-core-harmony-ipc-emmc-dc-linux-tpm/
> > > [2] https://patchwork.ozlabs.org/project/uboot/patch/20240311111027.44577-6-sumit.garg@linaro.org/
> > >
> > > Sumit Garg (3):
> > > dt-bindings: vendor-prefixes: Add Schneider Electric
> > > dt-bindings: arm: qcom: Add Schneider Electric HMIBSC board
> > > arm64: dts: qcom: apq8016: Add Schneider HMIBSC board DTS
> > >
> > > .../devicetree/bindings/arm/qcom.yaml | 1 +
> > > .../devicetree/bindings/vendor-prefixes.yaml | 2 +
> > > arch/arm64/boot/dts/qcom/Makefile | 1 +
> > > .../dts/qcom/apq8016-schneider-hmibsc.dts | 491 ++++++++++++++++++
> > > 4 files changed, 495 insertions(+)
> > > create mode 100644 arch/arm64/boot/dts/qcom/apq8016-schneider-hmibsc.dts
> > >
> > > --
> > > 2.34.1
> > >

\
 
 \ /
  Last update: 2024-04-29 09:21    [W:0.247 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site