lkml.org 
[lkml]   [2024]   [Apr]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 6/7] phy: qcom-qmp-pcie: add support for ipq9574 gen3x2 PHY
On Wed, Apr 17, 2024 at 12:50:49AM +0300, Dmitry Baryshkov wrote:
> On Wed, 17 Apr 2024 at 00:25, Alex G. <mr.nuke.me@gmail.com> wrote:
> >
> > Hi Dmitry,
> >
> > On 4/15/24 16:25, mr.nuke.me@gmail.com wrote:
> > >
> > >
> > > On 4/15/24 15:10, Dmitry Baryshkov wrote:
> > >> On Mon, 15 Apr 2024 at 21:23, Alexandru Gagniuc <mr.nuke.me@gmail.com>
> > >> wrote:
> > >>>
> > >>> Add support for the gen3x2 PCIe PHY on IPQ9574, ported form downstream
> > >>> 5.4 kernel. Only the serdes and pcs_misc tables are new, the others
> > >>> being reused from IPQ8074 and IPQ6018 PHYs.
> > >>>
> > >>> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
> > >>> ---
> > >>> drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 136 +++++++++++++++++-
> > >>> .../phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5.h | 14 ++
> > >>> 2 files changed, 149 insertions(+), 1 deletion(-)
> > >>>
> > >>
> > >> [skipped]
> > >>
> > >>> @@ -2448,7 +2542,7 @@ static inline void qphy_clrbits(void __iomem
> > >>> *base, u32 offset, u32 val)
> > >>>
> > >>> /* list of clocks required by phy */
> > >>> static const char * const qmp_pciephy_clk_l[] = {
> > >>> - "aux", "cfg_ahb", "ref", "refgen", "rchng", "phy_aux",
> > >>> + "aux", "cfg_ahb", "ref", "refgen", "rchng", "phy_aux",
> > >>> "anoc", "snoc"
> > >>
> > >> Are the NoC clocks really necessary to drive the PHY? I think they are
> > >> usually connected to the controllers, not the PHYs.
> > >
> > > The system will hang if these clocks are not enabled. They are also
> > > attached to the PHY in the QCA 5.4 downstream kernel.
>
> Interesting.
> I see that Varadarajan is converting these clocks into interconnects.
> Maybe it's better to wait for those patches to land and use
> interconnects instead. I think it would better suit the
> infrastructure.
>
> Varadarajan, could you please comment, are these interconnects
> connected to the PHY too or just to the PCIe controller?

Sorry for the late response. Missed this e-mail.

These 2 clks are related to AXI port clk on Aggnoc/SNOC, not
directly connected to PCIE wrapper, but it should be enabled to
generate pcie traffic.

Thanks
Varada

> > They are named "anoc_lane", and "snoc_lane" in the downstream kernel.
> > Would you like me to use these names instead?
>
> I'm fine either way.
>
> > e>>> };
> > >>>
> > >>> /* list of regulators */
> > >>> @@ -2499,6 +2593,16 @@ static const struct qmp_pcie_offsets
> > >>> qmp_pcie_offsets_v4x1 = {
> > >>> .rx = 0x0400,
> > >>> };
> > >>>
> > >>> +static const struct qmp_pcie_offsets qmp_pcie_offsets_ipq9574 = {
> > >>> + .serdes = 0,
> > >>> + .pcs = 0x1000,
> > >>> + .pcs_misc = 0x1400,
> > >>> + .tx = 0x0200,
> > >>> + .rx = 0x0400,
> > >>> + .tx2 = 0x0600,
> > >>> + .rx2 = 0x0800,
> > >>> +};
> > >>> +
> > >>> static const struct qmp_pcie_offsets qmp_pcie_offsets_v4x2 = {
> > >>> .serdes = 0,
> > >>> .pcs = 0x0a00,
> > >>> @@ -2728,6 +2832,33 @@ static const struct qmp_phy_cfg
> > >>> sm8250_qmp_gen3x1_pciephy_cfg = {
> > >>> .phy_status = PHYSTATUS,
> > >>> };
> > >>>
> > >>> +static const struct qmp_phy_cfg ipq9574_pciephy_gen3x2_cfg = {
> > >>> + .lanes = 2,
> > >>> +
> > >>> + .offsets = &qmp_pcie_offsets_ipq9574,
> > >>> +
> > >>> + .tbls = {
> > >>> + .serdes = ipq9574_gen3x2_pcie_serdes_tbl,
> > >>> + .serdes_num =
> > >>> ARRAY_SIZE(ipq9574_gen3x2_pcie_serdes_tbl),
> > >>> + .tx = ipq8074_pcie_gen3_tx_tbl,
> > >>> + .tx_num = ARRAY_SIZE(ipq8074_pcie_gen3_tx_tbl),
> > >>> + .rx = ipq6018_pcie_rx_tbl,
> > >>> + .rx_num = ARRAY_SIZE(ipq6018_pcie_rx_tbl),
> > >>> + .pcs = ipq6018_pcie_pcs_tbl,
> > >>> + .pcs_num = ARRAY_SIZE(ipq6018_pcie_pcs_tbl),
> > >>> + .pcs_misc = ipq9574_gen3x2_pcie_pcs_misc_tbl,
> > >>> + .pcs_misc_num =
> > >>> ARRAY_SIZE(ipq9574_gen3x2_pcie_pcs_misc_tbl),
> > >>> + },
> > >>> + .reset_list = ipq8074_pciephy_reset_l,
> > >>> + .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
> > >>> + .vreg_list = NULL,
> > >>> + .num_vregs = 0,
> > >>> + .regs = pciephy_v4_regs_layout,
> > >>
> > >> So, is it v4 or v5?
> > >
> > > Please give me a day or so to go over my notes and give you a more
> > > coherent explanation of why this versioning was chosen. I am only
> > > working from the QCA 5.4 downstream sources. I don't have any
> > > documentation for the silicon
> >
> > The downstream QCA kernel uses the same table for ipq6018, ipq8074-gen3,
> > and ipq9574. It is named "ipq_pciephy_gen3_regs_layout". Thus, it made
> > sense to use the same upstream table for ipq9574, "pciephy_v4_regs_layout".
> >
> > As far as the register tables go, the pcs/pcs_misc are squashed into the
> > same table in the downstream 5.4 kernel. I was able to separate the two
> > tables because the pcs_misc registers were defined with an offset of
> > 0x400. For example:
> >
> > /* QMP V2 PHY for PCIE gen3 2 Lane ports - PCS Misc registers */
> > #define PCS_PCIE_X2_POWER_STATE_CONFIG2 0x40c
> > #define PCS_PCIE_X2_POWER_STATE_CONFIG4 0x414
> > #define PCS_PCIE_X2_ENDPOINT_REFCLK_DRIVE 0x420
> > #define PCS_PCIE_X2_L1P1_WAKEUP_DLY_TIME_AUXCLK_L 0x444
> > #define PCS_PCIE_X2_L1P1_WAKEUP_DLY_TIME_AUXCLK_H 0x448
> > #define PCS_PCIE_X2_L1P2_WAKEUP_DLY_TIME_AUXCLK_L 0x44c
> > #define PCS_PCIE_X2_L1P2_WAKEUP_DLY_TIME_AUXCLK_H 0x450
> > ...
> >
> > Here, QPHY_V4_PCS_PCIE_POWER_STATE_CONFIG2 = 0xc would be correct,
> > assuming a pcs_misc offset of 0x400. However, starting with
> > ENDPOINT_REFCLK_DRIVE, the register would be
> > QPHY_V4_PCS_PCIE_ENDPOINT_REFCLK_DRIVE = 0x1c. Our offsets are off-by 0x4.
> >
> > The existing V5 offsets, on the other hand, were all correct. For this
> > reason, I considered that V5 is the most likely place to add the missing
> > PCS misc definitions.
>
> Ok, sounds sane. Please use _v5 for the regs layout.
>
> >
> > Is this explanation sufficiently convincing? Where does the v4/v5 scheme
> > in upstream kernel originate?
>
> Sometimes it's vendor kernels, sometimes it's a feedback from devs
> that have access to actual specs.
>
>
> --
> With best wishes
> Dmitry

\
 
 \ /
  Last update: 2024-04-29 08:21    [W:0.060 / U:1.968 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site