lkml.org 
[lkml]   [2024]   [Apr]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/6] iio: light: stk3310: Implement vdd supply and power it off during suspend
On Tue, 23 Apr 2024 18:33:05 -0400
Aren Moynihan <aren@peacevolution.org> wrote:

> From: Ondrej Jirman <megi@xff.cz>
>
> VDD power input can be used to completely power off the chip during
> system suspend. Do so if available.
>
> Signed-off-by: Ondrej Jirman <megi@xff.cz>
> Signed-off-by: Aren Moynihan <aren@peacevolution.org>

Suggestions inline. Key thing is take the whole thing devm_ managed
and your life gets much easier. It is mixing the two approaches that
causes problems and often the best plan is to do everything in probe/remove
with devm_ calls to do the cleanup for you.

> ---
>
> Notes:
> Changes in v2:
> - always enable / disable regulators and rely on a dummy regulator if
> one isn't specified
> - replace usleep_range with fsleep
> - reorder includes so iio headers are last
> - add missing error handling to resume
>
> drivers/iio/light/stk3310.c | 49 ++++++++++++++++++++++++++++++++++---
> 1 file changed, 46 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/iio/light/stk3310.c b/drivers/iio/light/stk3310.c
> index 7b71ad71d78d..a0547eeca3e3 100644
> --- a/drivers/iio/light/stk3310.c
> +++ b/drivers/iio/light/stk3310.c
> @@ -13,6 +13,8 @@
> #include <linux/module.h>
> #include <linux/mod_devicetable.h>
> #include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
> +
> #include <linux/iio/events.h>
> #include <linux/iio/iio.h>
> #include <linux/iio/sysfs.h>
> @@ -117,6 +119,7 @@ struct stk3310_data {
> struct regmap_field *reg_int_ps;
> struct regmap_field *reg_flag_psint;
> struct regmap_field *reg_flag_nf;
> + struct regulator *vdd_reg;
> };
>
> static const struct iio_event_spec stk3310_events[] = {
> @@ -607,6 +610,10 @@ static int stk3310_probe(struct i2c_client *client)
>
> mutex_init(&data->lock);
>
> + data->vdd_reg = devm_regulator_get(&client->dev, "vdd");
> + if (IS_ERR(data->vdd_reg))
> + return dev_err_probe(&client->dev, ret, "get regulator vdd failed\n");
> +
> ret = stk3310_regmap_init(data);
> if (ret < 0)
> return ret;
> @@ -617,9 +624,17 @@ static int stk3310_probe(struct i2c_client *client)
> indio_dev->channels = stk3310_channels;
> indio_dev->num_channels = ARRAY_SIZE(stk3310_channels);
>
> + ret = regulator_enable(data->vdd_reg);
> + if (ret)
> + return dev_err_probe(&client->dev, ret,
> + "regulator vdd enable failed\n");
> +
> + /* we need a short delay to allow the chip time to power on */
> + fsleep(1000);
> +
> ret = stk3310_init(indio_dev);
> if (ret < 0)
> - return ret;
> + goto err_vdd_disable;
>
> if (client->irq > 0) {
> ret = devm_request_threaded_irq(&client->dev, client->irq,
> @@ -645,32 +660,60 @@ static int stk3310_probe(struct i2c_client *client)
>
> err_standby:
> stk3310_set_state(data, STK3310_STATE_STANDBY);

Move this handling to a devm_add_action_or_reset() callback in a precursor patch.
That will fix the current ordering issue wrt to the irq registration.

Then use devm_iio_device_register() in that precursor patch.

> +err_vdd_disable:
> + regulator_disable(data->vdd_reg);

Add a devm_add_action_or_reset() callback to disable this regulator in this patch.
Register that just after the enable.

That way the ordering will be maintained for all calls.
> return ret;
> }
>
> static void stk3310_remove(struct i2c_client *client)
> {
> struct iio_dev *indio_dev = i2c_get_clientdata(client);
> + struct stk3310_data *data = iio_priv(indio_dev);
>
> iio_device_unregister(indio_dev);
> stk3310_set_state(iio_priv(indio_dev), STK3310_STATE_STANDBY);
> + regulator_disable(data->vdd_reg);

With above suggested changes, you can drop the remove function entirely.

> }
>
> static int stk3310_suspend(struct device *dev)
> {
> struct stk3310_data *data;
> + int ret;
>
> data = iio_priv(i2c_get_clientdata(to_i2c_client(dev)));
>
> - return stk3310_set_state(data, STK3310_STATE_STANDBY);
> + ret = stk3310_set_state(data, STK3310_STATE_STANDBY);
> + if (ret)
> + return ret;
> +
> + regcache_mark_dirty(data->regmap);
> + regulator_disable(data->vdd_reg);
> +
> + return 0;
> }
>
> static int stk3310_resume(struct device *dev)
> {
> - u8 state = 0;
> struct stk3310_data *data;
> + u8 state = 0;
> + int ret;
>
> data = iio_priv(i2c_get_clientdata(to_i2c_client(dev)));
> +
> + ret = regulator_enable(data->vdd_reg);
> + if (ret) {
> + dev_err(dev, "Failed to re-enable regulator vdd\n");
> + return ret;
> + }
> +
> + fsleep(1000);
> +
> + ret = regcache_sync(data->regmap);
> + if (ret) {
> + dev_err(dev, "Failed to restore registers: %d\n", ret);
> + return ret;
> + }
> +
> if (data->ps_enabled)
> state |= STK3310_STATE_EN_PS;
> if (data->als_enabled)


\
 
 \ /
  Last update: 2024-04-28 18:54    [W:0.100 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site