lkml.org 
[lkml]   [2024]   [Mar]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2 3/4] arm64: dts: qcom: ipq6018: move mp5496 regulator outside soc dtsi
Date
Hi, Dmitry
> Please inline this dtsi file into the board file. While it might seem
> to make life easier, having such includes makes following regulator
> settings much harder. Especially once a board or two start overriding
> or expanding those settings.

Thanks for your suggestion. But unlike mobile phones or dev boards,
I don't think any manufacturer will change the voltage settings of
the mp5496 pmic on the ipq60xx router. The s2 part of mp5496 pmic
is used to supply the CPU, and its min/max voltage corresponds to
the CPU frequency of ipq60xx. Although the downstream qsdk kernel
uses the cpr regulator driver, its min/max voltage is still the
same as the current setting.

Thanks,
Chukun

--
2.25.1


\
 
 \ /
  Last update: 2024-05-27 15:43    [W:0.091 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site