lkml.org 
[lkml]   [2024]   [Feb]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [RESEND PATCH v2 1/4] arm64: dts: ti: k3-j7200-common-proc-board: Modify Pinmux for wkup_uart0 and mcu_uart0
From

On 14/02/24 12:58 pm, Vignesh Raghavendra wrote:
>
> On 12/02/24 16:14, Bhavya Kapoor wrote:
>> WKUP_PADCONFIG registers for wkup_uart0 and mcu_uart0 lies
>> under wkup_pmx2 for J7200. Thus, modify pinmux for both
>> of them.
>>
>> Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
>> ---
>
> This warrants a Fixes: tag. Can you provide one here? I can fix it up
> when merging.
Yes , i agree to that. I will send a v3 with the required changes
>> .../boot/dts/ti/k3-j7200-common-proc-board.dts | 17 +++++++++--------
>> 1 file changed, 9 insertions(+), 8 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
>> index 1d8bddcae90e..160580a0584a 100644
>> --- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
>> +++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
>> @@ -119,24 +119,25 @@ transceiver3: can-phy3 {
>> };
>>
>> &wkup_pmx0 {
>> +};
>> +
>> +&wkup_pmx2 {
>> mcu_uart0_pins_default: mcu-uart0-default-pins {
>> pinctrl-single,pins = <
>> - J721E_WKUP_IOPAD(0xf4, PIN_INPUT, 0) /* (D20) MCU_UART0_RXD */
>> - J721E_WKUP_IOPAD(0xf0, PIN_OUTPUT, 0) /* (D19) MCU_UART0_TXD */
>> - J721E_WKUP_IOPAD(0xf8, PIN_INPUT, 0) /* (E20) MCU_UART0_CTSn */
>> - J721E_WKUP_IOPAD(0xfc, PIN_OUTPUT, 0) /* (E21) MCU_UART0_RTSn */
>> + J721E_WKUP_IOPAD(0x90, PIN_INPUT, 0) /* (E20) MCU_UART0_CTSn */
>> + J721E_WKUP_IOPAD(0x94, PIN_OUTPUT, 0) /* (E21) MCU_UART0_RTSn */
>> + J721E_WKUP_IOPAD(0x8c, PIN_INPUT, 0) /* (D20) MCU_UART0_RXD */
>> + J721E_WKUP_IOPAD(0x88, PIN_OUTPUT, 0) /* (D19) MCU_UART0_TXD */
>> >;
>> };
>>
>> wkup_uart0_pins_default: wkup-uart0-default-pins {
>> pinctrl-single,pins = <
>> - J721E_WKUP_IOPAD(0xb0, PIN_INPUT, 0) /* (B14) WKUP_UART0_RXD */
>> - J721E_WKUP_IOPAD(0xb4, PIN_OUTPUT, 0) /* (A14) WKUP_UART0_TXD */
>> + J721E_WKUP_IOPAD(0x48, PIN_INPUT, 0) /* (B14) WKUP_UART0_RXD */
>> + J721E_WKUP_IOPAD(0x4c, PIN_OUTPUT, 0) /* (A14) WKUP_UART0_TXD */
>> >;
>> };
>> -};
>>
>> -&wkup_pmx2 {
>> mcu_cpsw_pins_default: mcu-cpsw-default-pins {
>> pinctrl-single,pins = <
>> J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */

\
 
 \ /
  Last update: 2024-05-27 15:02    [W:0.056 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site