lkml.org 
[lkml]   [2021]   [Jun]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH net-next v8 11/15] net: mdio: Add ACPI support code for mdio
    Date
    From: Calvin Johnson <calvin.johnson@oss.nxp.com>

    Define acpi_mdiobus_register() to Register mii_bus and create PHYs for
    each ACPI child node.

    Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
    Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
    ---

    Changes in v8: None
    Changes in v7:
    - Include headers directly used in acpi_mdio.c

    Changes in v6:
    - use GENMASK() and ACPI_COMPANION_SET()
    - some cleanup
    - remove unwanted header inclusion

    Changes in v5:
    - add missing MODULE_LICENSE()
    - replace fwnode_get_id() with OF and ACPI function calls

    Changes in v4: None
    Changes in v3: None
    Changes in v2: None

    MAINTAINERS | 1 +
    drivers/net/mdio/Kconfig | 7 +++++
    drivers/net/mdio/Makefile | 1 +
    drivers/net/mdio/acpi_mdio.c | 56 ++++++++++++++++++++++++++++++++++++
    include/linux/acpi_mdio.h | 26 +++++++++++++++++
    5 files changed, 91 insertions(+)
    create mode 100644 drivers/net/mdio/acpi_mdio.c
    create mode 100644 include/linux/acpi_mdio.h

    diff --git a/MAINTAINERS b/MAINTAINERS
    index e8f8b6c33a51..2172f594be8f 100644
    --- a/MAINTAINERS
    +++ b/MAINTAINERS
    @@ -6811,6 +6811,7 @@ F: Documentation/devicetree/bindings/net/mdio*
    F: Documentation/devicetree/bindings/net/qca,ar803x.yaml
    F: Documentation/networking/phy.rst
    F: drivers/net/mdio/
    +F: drivers/net/mdio/acpi_mdio.c
    F: drivers/net/mdio/fwnode_mdio.c
    F: drivers/net/mdio/of_mdio.c
    F: drivers/net/pcs/
    diff --git a/drivers/net/mdio/Kconfig b/drivers/net/mdio/Kconfig
    index 422e9e042a3c..99a6c13a11af 100644
    --- a/drivers/net/mdio/Kconfig
    +++ b/drivers/net/mdio/Kconfig
    @@ -34,6 +34,13 @@ config OF_MDIO
    help
    OpenFirmware MDIO bus (Ethernet PHY) accessors

    +config ACPI_MDIO
    + def_tristate PHYLIB
    + depends on ACPI
    + depends on PHYLIB
    + help
    + ACPI MDIO bus (Ethernet PHY) accessors
    +
    if MDIO_BUS

    config MDIO_DEVRES
    diff --git a/drivers/net/mdio/Makefile b/drivers/net/mdio/Makefile
    index 2e6813c709eb..15f8dc4042ce 100644
    --- a/drivers/net/mdio/Makefile
    +++ b/drivers/net/mdio/Makefile
    @@ -1,6 +1,7 @@
    # SPDX-License-Identifier: GPL-2.0
    # Makefile for Linux MDIO bus drivers

    +obj-$(CONFIG_ACPI_MDIO) += acpi_mdio.o
    obj-$(CONFIG_FWNODE_MDIO) += fwnode_mdio.o
    obj-$(CONFIG_OF_MDIO) += of_mdio.o

    diff --git a/drivers/net/mdio/acpi_mdio.c b/drivers/net/mdio/acpi_mdio.c
    new file mode 100644
    index 000000000000..60a86e3fc246
    --- /dev/null
    +++ b/drivers/net/mdio/acpi_mdio.c
    @@ -0,0 +1,56 @@
    +// SPDX-License-Identifier: GPL-2.0-only
    +/*
    + * ACPI helpers for the MDIO (Ethernet PHY) API
    + *
    + * This file provides helper functions for extracting PHY device information
    + * out of the ACPI ASL and using it to populate an mii_bus.
    + */
    +
    +#include <linux/acpi.h>
    +#include <linux/acpi_mdio.h>
    +#include <linux/bits.h>
    +#include <linux/dev_printk.h>
    +#include <linux/fwnode_mdio.h>
    +#include <linux/module.h>
    +#include <linux/types.h>
    +
    +MODULE_AUTHOR("Calvin Johnson <calvin.johnson@oss.nxp.com>");
    +MODULE_LICENSE("GPL");
    +
    +/**
    + * acpi_mdiobus_register - Register mii_bus and create PHYs from the ACPI ASL.
    + * @mdio: pointer to mii_bus structure
    + * @fwnode: pointer to fwnode of MDIO bus.
    + *
    + * This function registers the mii_bus structure and registers a phy_device
    + * for each child node of @fwnode.
    + */
    +int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode)
    +{
    + struct fwnode_handle *child;
    + u32 addr;
    + int ret;
    +
    + /* Mask out all PHYs from auto probing. */
    + mdio->phy_mask = GENMASK(31, 0);
    + ret = mdiobus_register(mdio);
    + if (ret)
    + return ret;
    +
    + ACPI_COMPANION_SET(&mdio->dev, to_acpi_device_node(fwnode));
    +
    + /* Loop over the child nodes and register a phy_device for each PHY */
    + fwnode_for_each_child_node(fwnode, child) {
    + ret = acpi_get_local_address(ACPI_HANDLE_FWNODE(child), &addr);
    + if (ret || addr >= PHY_MAX_ADDR)
    + continue;
    +
    + ret = fwnode_mdiobus_register_phy(mdio, child, addr);
    + if (ret == -ENODEV)
    + dev_err(&mdio->dev,
    + "MDIO device at address %d is missing.\n",
    + addr);
    + }
    + return 0;
    +}
    +EXPORT_SYMBOL(acpi_mdiobus_register);
    diff --git a/include/linux/acpi_mdio.h b/include/linux/acpi_mdio.h
    new file mode 100644
    index 000000000000..0a24ab7cb66f
    --- /dev/null
    +++ b/include/linux/acpi_mdio.h
    @@ -0,0 +1,26 @@
    +/* SPDX-License-Identifier: GPL-2.0-only */
    +/*
    + * ACPI helper for the MDIO (Ethernet PHY) API
    + */
    +
    +#ifndef __LINUX_ACPI_MDIO_H
    +#define __LINUX_ACPI_MDIO_H
    +
    +#include <linux/phy.h>
    +
    +#if IS_ENABLED(CONFIG_ACPI_MDIO)
    +int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode);
    +#else /* CONFIG_ACPI_MDIO */
    +static inline int
    +acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode)
    +{
    + /*
    + * Fall back to mdiobus_register() function to register a bus.
    + * This way, we don't have to keep compat bits around in drivers.
    + */
    +
    + return mdiobus_register(mdio);
    +}
    +#endif
    +
    +#endif /* __LINUX_ACPI_MDIO_H */
    --
    2.31.1
    \
     
     \ /
      Last update: 2021-06-10 18:43    [W:2.548 / U:0.316 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site